Design Your Table Lamp: Introduction to 3D Design and Print

Unleash your creativity and dive into the captivating world of 3D design and printing. This hands-on workshop guides aspiring designers through the process of crafting a personalized table lamp using Tinkercad, a user-friendly 3D modeling software. Over the course of two immersive hours, you’ll not only master the art of 3D design but also gain insights into the intriguing mechanics behind the printing process. With personalized attention in an intimate setting, this workshop promises to ignite your passion for innovation and leave you eager to explore the boundless possibilities of this transformative technology.

Key Points

• This 2-hour workshop teaches participants the basics of 3D modeling using Tinkercad and guides them through designing a personalized table lamp.
• Participants will learn the 3D printing process, from file preparation to final product, and receive hands-on assistance throughout the workshop.
• Participants are required to bring their own laptops with a mouse for the hands-on design activities, and prior familiarity with Tinkercad is encouraged.
• Printed lamps can be collected by local participants or shipped, with shipping costs covered by the participants.
• The workshop is limited to 3 participants and is not suitable for children under 15 years of age.

Workshop Overview

The workshop is titled "Design your table lamp: Introduction to 3D design and print" and lasts for 2 hours.

It’s limited to 3 participants, with the option to attend in English or Italian. The cost is $88.89 per person.

The workshop covers the basics of 3D design using Tinkercad, designing a personalized table lamp, understanding the 3D printing process, and hands-on assistance throughout.

Participants must bring their own laptops, preferably with a mouse.

The printed lamp can be picked up or shipped, with shipping costs covered by the participants.

The printing process may take several hours, and local participants can collect their lamps in the days after the workshop.

Learning Objectives

Designed to equip participants with fundamental 3D design skills, the learning objectives of this workshop include mastering the basics of Tinkercad, a popular 3D modeling software.

Participants will learn to design a personalized table lamp, applying their newfound knowledge. Plus, they’ll gain an understanding of the 3D printing process, from file preparation to final product.

Throughout the workshop, hands-on assistance will be provided, ensuring participants can bring their creative ideas to life.

Laptop and Accessories

Participants must bring their own laptops, preferably with a mouse, to the workshop. The laptops will be used throughout the session to design the personalized table lamp using Tinkercad, a popular 3D design software.

To ensure a smooth experience, participants are encouraged to consider the following:

1. Ensure the laptop is charged and ready to use for the duration of the workshop.
2. Bring a mouse, as it will provide more precision and control during the design process.
3. Familiarize themselves with the Tinkercad software beforehand, if possible, to hit the ground running.
4. Be prepared to work collaboratively with the other participants, as the group size is limited to 3 people.

Printing Process

After the design process, the printed lamp will be ready for participants to collect or have shipped to their desired location.

The printing may take several hours, so local participants can pick up their lamps in the days following the workshop. For those unable to collect in person, the lamps will be shipped, with shipping costs covered by the participants.

The 3D printing process ensures each lamp is uniquely personalized to the participant’s design. Participants will leave the workshop with a better understanding of the 3D printing workflow and their own customized table lamp, a testament to their creativity and the workshop’s hands-on approach.

Lamp Pickup and Shipping

For local participants, lamps can be collected in the days following the workshop.

For those unable to pick up in person, the lamps will be shipped to the participants’ addresses. The shipping costs are covered by the participants and may take several days to arrive.

The workshop includes:

1. Printed lamp pickup or shipping for all participants.
2. Shipping times may vary depending on location.
3. Participants are responsible for covering the shipping costs.
4. Lamps will be available for pickup or delivered within a few days after the workshop.

Booking and Cancellation

Customers can reserve a spot in the workshop without any upfront payment.

The workshop offers free cancellation up to 24 hours in advance for a full refund. Participants are advised to check availability before booking, as the group size is limited to 3 people.

The meeting point is at the ring bell of Mauro Porcu, which can be accessed through Google Maps.

This workshop isn’t suitable for children under 15 years old.

Participant Restrictions

The workshop isn’t suitable for children under 15 years of age.

Participants must check availability before booking, as the group size is limited to 3 individuals.

The meeting point is at the ring bell Mauro Porcu, which can be located using Google Maps.

To participate, attendees are required to bring their own laptops, preferably with a mouse, as they’ll be engaging in hands-on 3D design activities throughout the workshop.

1. Not suitable for children under 15 years.
2. Participants must check availability before booking.
3. Meeting point: Ring bell Mauro Porcu, Open in Google Maps.
4. Participants must bring their own laptops, preferably with a mouse.

Location and Meeting Point

The workshop takes place at the meeting point located at the ring bell Mauro Porcu, which can be found by opening the provided Google Maps link. Participants must check availability before booking, as the workshop is limited to a group size of 3. The meeting point’s address is as follows:

Address
Street	Ring bell Mauro Porcu
City
Coordinates	Open in Google Maps

The workshop is not suitable for children under 15 years of age, and participants are required to bring their own laptops, preferably with a mouse.

Frequently Asked Questions

Can Participants Bring Their Own 3D Design Files?

Participants can bring their own 3D design files to the workshop. However, the primary focus will be on using Tinkercad to design a personalized table lamp during the session, with hands-on assistance provided by the instructors.

Is There a Size Limit for the Table Lamp Design?

The workshop does not mention any size limit for the table lamp design. Participants are free to design their lamps within the capabilities of the 3D printing process used in the workshop. However, overly large or complex designs may impact the printing time and cost.

Can Participants Take Home Their Design Files After the Workshop?

Participants can take home their 3D design files after the workshop. The workshop includes instructions on how to access and save the design files created during the session for future use or further modifications.

Is Technical Assistance Available During the 3D Printing Process?

Yes, the workshop provides hands-on assistance throughout the entire process, including the 3D printing stage. Participants can expect support from the instructors as their designs are printed, ensuring a successful outcome.

Are Replacement Parts for the Table Lamp Available for Purchase?

Replacement parts for the table lamp are not explicitly mentioned in the workshop overview. However, the hands-on assistance provided suggests the organizers may be able to offer guidance or resources on obtaining replacement parts if needed after the 3D printing process.

Recap

The "Design Your Table Lamp: Introduction to 3D Design and Print" workshop is a hands-on opportunity to create a personalized lamp. With Tinkercad, you will design their lamp and learn about the printing process. This intimate, collaborative setting ensures tailored assistance. Bring your laptop and mouse, and enjoy exploring the world of 3D printing. Upon completion, participants can pick up or have their lamp shipped.